specifications ordering info options occupancy controlled dimming (d) ? provides dimming output to control 0-10 vdc dimmable ballasts ? provides a second occupancy time-out period that enables the lights to go to a dim setting before turning off ? adjustable max/min dim setting photocell (p) ? auto set-point calibration ? two selectable modes of operation ? on/off mode: photocell has full control during periods of occupancy ? inhibit mode: photocell can prevent lights from turning on if adequate daylight is available, but cannot turn lights off photocell w/ dimming (adc) ? photocell within sensor maintains total room light level by controlling levels of 0-10 vdc dimmable ballasts ? photocell also has full on/off control during periods of occupancy ? provides a second occupancy time-out period that enables the lights to go to a dim setting before turning off note: lampmaximizer+ features not available with adc option 347 vac (347) ? allows sensor to be powered from and switch 347 vac low temp/high humidity (lt) ? sensor electronics are coated for corrosion resistance ? operates down to -40o f/c ? required for cooler/freezer applications water proof options (ip65 / ip65 kit) ? sensor is gasketed for inclusion into a wet location fxture (ip65) ? sensor is gasketed for inclusion into a provided 4x4 wet location junction box (ip65 kit) ? sensor electronics are coated for corrosion resistance ? operates down to -40o f/c overview the sbr 10 series incorporates passive infrared (pir) technology into a line powered occupancy sensor to provide maximum viewing from the ceiling. the sbr 10 sensor recess mounts into a 2.65 (6.73 cm) square opening in a fxture. its circular coverage pattern is designed for walking motions; making it ideal for t-shaped intersections in corridors, or other areas where wall mounting a sensor is not practical. low ceiling heights are also best covered with the sbr 10 . for example, when mounted at only 7 ft (2.13 m), the height of pick aisles in many distribution centers, the sbr 10 provides a 32 ft (9.75 m) diameter pattern of coverage. sensor operation the sensor detects changes in the infrared energy given off by occupants as they move within the feld-of-view. when occupancy is detected, a self-contained relay switches the connected lighting load on. the sensor is line powered, switches line voltage, and requires no feld calibration or sensitivity adjustments. lampmaximizer ? this sensor also contains patent pending lampmaximizer technology that allows users to aggressively target energy savings while still protecting lamp life. a minimum on timer, factory set at 15 minutes, helps preserve lamp life by eliminating all lamp cycles shorter than lamp manufacturers recommendations. a standard occupancy time delay is also present that ensures lights turn off (assuming minimum on timer has elapsed) if no occupancy is detected. this timer is factory set at 10 minutes to promote energy savings, but is adjustable between 30 seconds and 20 minutes. these adjustments can be done manually, through the units push-button, or automatically every two weeks through an advanced mode, called lampmaximizer+, that determines the optimum time delay in order to maximize both lamp life and energy savings. additionally, this sensor maintains statistics on total lamp on time and number of cycles. extended range 360o sensor embedded small box ? line voltage ? passive infrared (pir) sbr 10 features 100% digital pir detection, excellent rf immunity self-contained relay, no power pack needed no minimum load requirements compatible w/ electronic & magnetic ballasts, cfls, led, & incandescents interchangeable hot & load wires, impossible to wire in reverse push-button programmable non-volatile settings memory adjustable time delays no field calibration or sensitivity adjustments required convenient test mode 100 hr lamp burn-in timer green led indicator lampmaximizer ? technology ? protects lamp life while maximizing energy savings ? minimum on timer (15 min default) ? occ. time delay (10 min default) ? lampmaximizer+ mode - optimizes lamp life & energy savings (disabled by default) ? switch counter (in 1000s) ? total lamp on time (in khrs) physical specs size ( w / mounting flange) 3.40 h x 3.40 w x 1.40 d (8.64 cm x 8.64 cm x 3.56 cm) weight 6 oz mounting 2.65 (6.73 cm) square opening in fxture (minimum depth 1.50 (3.8 cm)) color white electrical specs maximum load 800 w @ 120 vac 1200 w @ 277 vac 1500 w @ 347 vac minimum load none motor load 1/4 hp frequency 50/60 hz dimming load sinks < 20ma; ~40 ballasts @ .5ma each environmental specs operating temp 14o to 160o f (-10o to 71o c) relative humidity 20 to 90% non-condensing silicone free rohs compliant voltage blank = none blank = 120/277 vac blank = standard d = occupancy controlled dimming 347 = 347 vac lt = low temp p = photocell ip65 = water proof ( sensor only) adc = photocell w/ dimming ip65 kit = water proof ( sensor & j-box) sbr 10 [dimming/photocell] [voltage] [temp/humidity/water proof] dimming / photocell choose one only csa listed title 24 assembled in u.s.a. 5 year warranty temp/humidity/water prooof choose one only ? www.datasheet.co.kr datasheet pdf - http://www..net/
900 northrop road, wallingford, ct 06492 ? 1.800.passive ? fx 203.269.9621 ? www.sensorswitch.com warranty: sensor switch, inc. warrants these products to be free of defects in manufacture and workmanship for a period of 60 months. sensor switch, inc., upon prompt notice of such defect, will, at its option, provide a returned material authorization number and repair or replace returned product. limitations and exclusions: this warranty is in full lieu of all other representation and expressed and implied warranties (including the implied warranties of merchantability and ftness for use) and under no circumstances shall sensor switch, inc. be liable for any incidental or consequential property damages or losses. ts-sbr-003a revised 10.11.11 ? 2011 sensor switch installation wiring (do not wire hot) coverage pattern programming refer to instruction card ic7.001 for default settings and directions on programming the sensor via the push-button. 10 extended range 360o lens 0 ft 9 0 m 2.7 28 21 14 7 0 ft 7 14 21 28 8.5 6.4 4.3 2.1 0 m 2.1 4.3 6.4 8.5 side view top view 28 14 0 ft 14 28 8.5 4.3 0 m 4.3 8.5 *at 9ft mtg. a : when walking across beam, detection will occur at approximately 28 ft (8.53 m) b : when walking into beam, detection will occur at approximately 24 ft (7.32 m) ? best choice for large motion detection (e.g. walking) ? viewing angle of 67o in a 360o conical shaped pattern ? provides 28 ft (8.53 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling ? 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft (4.88 to 10.97 m) radial coverage blk blk vio (+) wht gry (-) [d, adc] dimming options h n switch load n n load hot wht wht blk blk blk blk standard wiring black* - line input black* - load output white - neutral 347 vac option (347) black wires are replaced w/ red wires dimming options (d, adc) violet - connect to violet control wire from 0-10 vdc dimmable ballast gray - connect to gray common wire from ballast initial power up the sensors relay is shipped in a latched closed position so the lights will come on upon initial power-up. if the lights do not immediately turn on (initial installation only) the latching relay opened during shipment and will close within 30 secs. note: if the sensor loses power, the internal relay will latch to on. sensors in parallel sensors may be wired in parallel; however, the maximum load ratings stay the same. do not wire sensors with p or adc option in parallel. *black wires can be reversed } ? the sb series offers a custom look for recess mounting in lighting fxtures. it mounts inside a 2.65 square opening in a fxture (minimum depth 1.50). ? sensor will detect motions crossing segments more effectively than motions parallel to beams ? for optimal detection, position sensor such that segments are crossed upon entrance and unable to view outside the space push b ut t on fire hazard caution : maximum lamps 1500 watts, type 347 vac. attention : risque dincendie : pauissance maximales des lampes 1500 watts, type 347 v ac. warning: the units are intended to be installed by a qualifed person with properly rated branch circuit protectors as per applicable local and national regulations (cec, nec). warning www.datasheet.co.kr datasheet pdf - http://www..net/
|
